posted January 26, 2003 01:59 PM
i'm looking at tring a new cam for next year and was wondering about wich one to go with they bolth are 244 durationand 510 lift on intake the difference is one is alos510 exhw/108 sep the other is 533exhw/112. i was wondering what effects the bigger exaust lift and seperation will have. my rules are 360 cid 9;1 comperssion and stock 2 brl rochester cars weights just under 3000 ready to go
posted January 26, 2003 02:41 PM
use the one with the 108 degree lobe centers. the car will get off the corner better.
posted January 26, 2003 05:11 PM
THE LOWER THE LOBE SEPARTATION THE SMALLER THE USEABLE POWERBAND.
YOU DONT WANT TOO MUCH DURATION, AT THAT COMP. RATIO, I WOULD CALL COMP CAMS... AND GET THEM TO SUGGEST A CAM THEN LOOK FOR A SIMILAR ONE IN A WHITE BOX FOR HALF THE PRICE.
posted January 27, 2003 08:48 AM
i guess i should put down what i'm running now to compare to lol it's a 228@50 dur and 480 lift on bolth sides but that is the specs @1.5 rocker i'm running a 1.6 so not sure what all that changes basicly wanting something for restarts and coming off the corner better