Visit The Dirt Forum for More Information

Author Topic:   383 stroker help !!
yakesservice
Member
posted January 19, 2003 12:18 PM
Id use I beam rods. less grinding on pan rail.compared to H beam,check 2 and 6 rods for cam clearance and rod to cylinder clearance on all 8. yes you should be able to get stroker clearanced rods.



66jj
Member
posted January 20, 2003 07:19 PM
pan rail will need a little grinding if you use rods with cap screws instead of rod bolts...

i beam rods will need the top of the rod bolt ground on, as well as the rod a little, its no biggie to do it your self...

but with i beams ive still had to just touch the pan rail a little with a grinder...

yakesservice
Member
posted January 20, 2003 09:03 PM
quote:
Originally posted by racer2:
Id use I beam rods. less grinding on pan rail.compared to H beam,check 2 and 6 rods for cam clearance and rod to cylinder clearance on all 8. yes you should be able to get stroker clearanced rods.


Thanks for the input, With stroker clearanced rods does that eliminate a small base circle cam ? Who sells those rods ?



Back to the Archives