Visit The Dirt Forum for More Information

Author Topic:   Porting ?
Rookieracer76
Member
posted January 12, 2003 08:14 PM
im thinking about porting my heads for my 350 sbc. Is porting easy or hard to do? i have 76cc heads. What can i gain by porting them? If i do port them, Do you they have to be exactly alike? Is there a place online with a full size templet i could print out and use? Thanks!

------------------
M.t.Pockets MotorSports
http://mtpocketsmotorsports14.freeservers.com/index.html
Snoboarda1@aol.com


Rookieracer76
Member
posted January 13, 2003 07:21 PM
Anyone?

------------------
M.t.Pockets MotorSports
http://www.mtpocketsmotorsports14.freeservers.com/index.html
Snoboarda1@aol.com


avila
Member
posted January 14, 2003 10:05 AM
http://www.sa-motorsports.com/diyport.htm


dynamyte
Member
posted January 21, 2003 12:55 AM
I ported and polished my heads and found it to be really easy but time comsuming. All i used was a dremel with the flex attachment. Just do not polish the intake because your fuel will not atomize with the air and you will lose horses. Hope this helps.


Back to the Archives