Visit The Dirt Forum for More Information

Author Topic:   383 block prep
RACEINMUD
Member
posted December 23, 2002 04:51 PM
Looking at building a 383. What do I need to do with my 350 block (grinding)to make it work? Thanks for the help. Raceinmud


jakedawg23
Member
posted December 23, 2002 10:28 PM
Sometimes you have to clearance the pan rails the rod bolts will hit on some blocks just something to look for. I wish i could tell you the clearance needed to be safe but i cant remember the numbers.


Speed Racer X
Member
posted December 24, 2002 07:24 PM
Try for .060 everywhere. Easy to get with this combo. I use pieces of 1/16" aluminum TIG wire with little ears bent on them, and clay on shoulders of rods, where cam is close. Exercise some caution down by the oil pan rail, 'cause there is water in there, and caveman grinding will find it!


RACEINMUD
Member
posted December 30, 2002 09:38 AM
Thank for the help! I'm gonna give it a try!


Back to the Archives