Visit The Dirt Forum for More Information

Author Topic:   pipe bender..
21dirtracernw
Member
posted March 16, 2004 09:11 PM
A good friend of mine dirtracer14 told me to see if anybody out there has ever heard of a Easy Bend pipe bender.

So I'am asking..
We want to bend 1"3/4 .095 pipe..

Any help would be wonderful..



racer17j
Member
posted March 16, 2004 09:55 PM
you want a tubing bender a pipe bender is a different animal. look on ebay there is a guy that sells manual pumping ones with 4 sets of dies for around 700 and 900 with air hydro pump setup think next year i'm just gonna buy a set of dies and build my own seen a few at a swap meet this weekend and looks to be pretty simple channel iron and a wally world bottle jack the dies are where you get into the money


21dirtracernw
Member
posted March 17, 2004 09:33 AM
hey found a bender in the southewest.. Its by a company called m-tech.. The whole thing with a set of dies will cost me about 550.. And then all we have to do is get another set of dies.. And we are all set and can up grade later..

if you want to know more about the bender let me know..

racer50
Member
posted March 17, 2004 07:44 PM
i have seen those speedway ones too thats not a bad deal if you only want to bend one size tubing but those dies are 250 a pop so why not get one with 4 dies for the same money


jasonracin19x
Member
posted March 17, 2004 09:21 PM
i got the one from mid america tools. the same one talked about earlier for about 900 with a hydraulic pump, works great and bends 3/4 thru 1 3/4 , i didnt like the manual benders, takes to long,,,,


de94wcc
Member
posted March 19, 2004 11:54 AM
I've been using a Pro-Tools manual bender for 10-12 years and it's held up very well.


Back to the Archives