Visit The Dirt Forum for More Information

Author Topic:   3 Link Forward Bite
tlkdlw
Member
posted February 24, 2004 06:51 PM
Would like some help on 3 link lower control arm
angle set up. What angle up for good forward bite. also set up for dry. I am running a Super Stock in Wisconsin any help would be Great!!

------------------


CUSTOMPERFORMANCE
Member
posted February 24, 2004 11:05 PM
lr angle up 10-20 deg rr 0-10

I would make a plug if you can and make the lr about 5 inches shorter than the right.

racingcrazy
Member
posted February 25, 2004 04:46 AM
Custom, Does these angles apply to a solid and a third link that has a torque divice?


99EMBREY
Member
posted February 25, 2004 12:18 PM
17" is that heim to heim or the tube length? A 17" tube with heims is about 20" heim to heim on center. If this is the case I would make the lr 15" c@c on the heims and leave the r the same.


CUSTOMPERFORMANCE
Member
posted February 25, 2004 11:10 PM
These angles are for solid lower links and a torque absorbing upper link. Upper link about 15-20 deg down hill.

I cant stress enough these are just starting points I advise using based on expierence but driver and track conditions will affect these #'s some. its a good base line to start with.

tlkdlw
Member
posted February 26, 2004 12:20 AM
Custom my set up now is left arm 20 1/2 hiem to hiem 0 deg up. Right 30 1/2 heim to heim 8 deg up. this is the first year we can run multi mounting holes. just trying to get idea on how to
change for more bite. Thanks


Back to the Archives