Visit The Dirt Forum for More Information

Author Topic:   Where can I get one piece 4 link Chassis brackets
rdirt
Member
posted January 28, 2004 07:46 PM
Lookin for 4 link chassis brackets.Would
like 1 piece laser cut.
AA makes some but there kind of funky and
7/8ths holes.

Thanks Rick

zeroracing
Member
posted January 28, 2004 07:55 PM
I can attest for the work zero can do on the cad.... A+++


zeroracing
Member
posted January 28, 2004 10:39 PM

Sketch what you want, I might have already made it, shoot me a private message and I will give you my fax #. We have made alot of 4 bar brackets with either 5/8" or 3/4" holes.



Dman
Member
posted January 30, 2004 09:04 AM
quote:
Originally posted by rdirt:
AA makes some but there kind of funky and
7/8ths holes.

I've been thinking about converting to 4-link and these brackets sound like they would take all the fuss out of doing it!

Ever ask A&A if they can make them with smaller holes? If they've got the CAD drawings already made up it wouldn't take much to shrink the holes if that's all you needed.


rdirt
Member
posted January 30, 2004 07:07 PM
Brian,Call Mike @ Glen hepner ind. he is
supposed to have some one piece brackets
cut,He just couldnt get them to me next
week.nice units and reasonably priced.
I ordered a bolt on left side from Harris
Good Luck Rick


CUSTOMPERFORMANCE
Member
posted January 31, 2004 07:09 AM
A@A does make them with 5/8 holes too. Another place to try that makes brackets and small parts is www.refabinc.com


MJC
Member
posted February 01, 2004 02:41 PM
I believe Dirtworks makes a bracket for their newer cars that is one piece for upper and lower links. I'm sure they would fit in other cars as well?


HarrisMod#30
Member
posted February 01, 2004 06:51 PM
OK - this may be a willy question, but I am planning to still run the 3-link rear setup when I weld in new brackets - anyone see any problems with this?? I can't think of anything that would prevent me from doing this but just wanted a reality check...


zeroracing
Member
posted February 02, 2004 01:04 PM
just take off your top links and lock your birdcages. it will work fine.


ratracer10
Member
posted February 03, 2004 06:43 AM
http://www.aa-mfg.com

------------------
- When in doubt, hit the gas.


Back to the Archives