Visit The Dirt Forum for More Information

Author Topic:   Cad drawings?
dirtracer14
Member
posted January 22, 2004 08:46 PM
Does anyone do cad drawings like if i had a bracket i wanted cut i would use a cad to set it up then take to the laser cutter...anyone good at this stuff?


NJantz
Member
posted January 23, 2004 06:52 AM
The place i took it too said it would be 7 to 10 working days for them to do it...unless i had it on a cad they said i could have it pretty quick! I have a carbboard templete made up that i can give measurements from. I also downloaded a cad program but couldnt figure out the scale size deal. That would be super cool if one of you could do this for me.

Zero i have a email for ya with the pic on it!

[This message has been edited by dirtracer14 (edited January 23, 2004).]

zeroracing
Member
posted January 23, 2004 05:21 PM
If you email or fax me a scetch of what you are looking for I'll make a you a print and can also send you a 3D model of the part or parts. I also can get the part or parts you need laser cut. Also can get them bent or anything else that needs done to the part or parts.

Email addy - rnilson@hotmail.com

Dman
Member
posted January 27, 2004 08:03 AM
not a problem

Email me the part that you want, and I will give you a call with more for more information. I would be willing to talk to the fab shop and see if they can you any type of electronic file to make the part too.

rnilson@hotmail.com

Back to the Archives