Visit The Dirt Forum for More Information

Author Topic:   nova lowers
FASTLAP
Member
posted January 03, 2004 06:20 AM
Additional Width 1 1/2" per side.


zeroracing
Member
posted January 03, 2004 08:07 AM
Watcha buildin Davy? I might have to sneek by and check it out


Dustejr73
Member
posted January 03, 2004 12:56 PM
i used them this year with pinto's no problem. you do have to use a spacer in the front mount, 1/2 inch i think. also the bushings have to be ground down to fit.


flowers99
Member
posted January 03, 2004 06:35 PM
i just measured and the spacer is 3/4 inch..


zeroracing
Member
posted January 03, 2004 07:59 PM
What is the difference in pinto to metric spindles?


FASTLAP
Member
posted January 03, 2004 11:13 PM
When your working with stock stubs and mostly stock suspension pieces it is hard to get everything where you want it to be , you have to compromise in one area to get another right on.


NJantz
Member
posted January 05, 2004 05:53 AM
quote:
Originally posted by udecide66:
also do you need to change the upper control arm if you go from a all metric setup to nova lowers?

Yes, you'll want to lengthen it out. Most guys are running a different center link also.



Back to the Archives