Visit The Dirt Forum for More Information

Author Topic:   4bar Zlink w/ lift arm
leftturn73
Member
posted December 26, 2003 10:58 AM
Most 4 bar Zlinkd set ups I see use a torque link or pull bar. Has anyone used a lift arms on a mod with a 4 bar Zlink set up?



zeroracing
Member
posted December 26, 2003 09:06 PM
quote:
Originally posted by leftturn73:
Most 4 bar Zlinkd set ups I see use a torque link or pull bar. Has anyone used a lift arms on a mod with a 4 bar Zlink set up?


We use a lift bar and it allows the rearend to twist while allowing the left rear tire to plant and grab. while doing this it also allows the front end to stay down. It does not put to much torque in the rear end like a staight bar does.


leftturn73
Member
posted January 05, 2004 11:49 AM
cbjlwolfe,
have you run a compairison between a pull bar and a lift bar with a 4 bar LR and a Z link RR????



cbjlwolfe
Member
posted January 09, 2004 08:23 PM
quote:
Originally posted by leftturn73:
cbjlwolfe,
have you run a compairison between a pull bar and a lift bar with a 4 bar LR and a Z link RR????



No we haven't. I know never use a straight if you run hard out of the corners. We have broken two straight bars so we don't use them. Just make sure that you check the mounts for a complete weld. It needs to go all the way around. We brake them all of the time.