Visit The Dirt Forum for More Information

Author Topic:   Fuel Line
Matt22
Member
posted December 10, 2003 03:55 PM
What kind of line do you guys recommend for fuel line? Should I go braided steel all the way or braided steel on the ends by fuel pump and cell with steel line in the middle? thanks for the info.


24KC
Member
posted December 10, 2003 05:59 PM
I would go with Pushlock hose its cheaper than braided better than steel, although it can be a real SOB to put ends on.


littleb24f
Member
posted December 12, 2003 05:16 AM
A little help on the pushlock hose. The best way to get a end on that hose is to take a hammer. And start hitting the hose at the end that you're going to put on a fitting. use something hard like the floor or vise. don't hit it so hard that you tear it. But enough that it "softens" put some wd-40 on the barbed end of the fitting and jam it in there. Should be good to go!


Back to the Archives