Visit The Dirt Forum for More Information

Author Topic:   3 Link Trailing Arms
HERNDON
Member
posted November 21, 2003 12:10 AM
I was wondering if anyone with a three link has used the trailing arms with the biscuit/spring. I've seen them in the Flexi-Flyer add, but I don't know of anyone that uses them.


grigs24
Member
posted November 21, 2003 01:25 PM
I have used one but it was the allstar version. It works well but only on very dry slick racetracks. If there was any moisture or bite in the track it made my car way to tight getting into the corner. I realize they claim it only tightens the car on acceleration but with my rear mounts clamped to the axel it tightened my car on entry also.


cd2
Member
posted November 23, 2003 02:19 PM
Herndon eighter pull bar will work good .When the track has bite an the car is tight getting in space the right rear out 2" an this will loosen you up an when the track dries out move R.R. back in an you should be good on dry. Sometimes on tackey track the car will be to tight in because the pull bar is not mounted far enough to the left. cd2


cd2
Member
posted November 23, 2003 02:23 PM
Herndon do not mount the pullbar or drive the car like i spell . Could be a bad night. cd2


Back to the Archives