Visit The Dirt Forum for More Information

Author Topic:   how do u run the short arm 3-link
squid
Member
posted November 16, 2003 09:28 PM
have seen people on here talk about it and want to hear more about it. Have talked to some people about it and sounds like a better deal. i run 17 and 18 in bars. what length or ratio long to short, or is there any difference. how much lead do you run and any change in spring rates. chassis builder has talked about 18 and 11 in bars keeping long panhard. just curious what others have tried liked and disliked.


thanx squid

"Bumpins like Humpin everybodys doin IT"

zeroracing
Member
posted November 16, 2003 11:42 PM
i would put the car on short bar in front of the rearend to the left side or at least a j-bar, then iwould put the leftrear length about 14 inches(that is pretty short i mean you could go shorter but the shorter you go the faster it will react.) and leave the long trailing arm on the rr.
then put both springs in front of the rearend, and put a little angle in the short bar and hold on it should work good.


Back to the Archives