Visit The Dirt Forum for More Information

Author Topic:   wishbone
zeroracing
Member
posted October 31, 2003 03:06 PM
I cant get my pics to load but i am finishing up a wishbone chassis and have a couple of pics I can send to those interested.


WPP
Member
posted November 15, 2003 05:11 AM
Could you take old swingarm and hook to the birdcage and use a shorter upper bar off the birdcage and hook to the swingarm


midmod34
Member
posted November 15, 2003 07:48 AM
Hey brad, What happened end of last year? You kind of dissappeared from the local tracks, you gonna be at hot and heavy again next year. Eric


lucky13
Member
posted November 15, 2003 01:36 PM
I know some mount the spring on top of the rear but can you mount it on the birdcage too or should you go to a clamp bracket in front of the rear


zeroracing
Member
posted November 15, 2003 05:50 PM
Can someone explain how the wishbone will work on the right rear right now i run a 4-bar left rear with the spring behind and z-link right rear with the spring on the birdcage i have been at the shop trying to figure out what the birdcage will do with this setup also i measured to centerline of the rearend and the mounting brackets on the chassis from the ground to the center of the rear it was 12 1/4 and the 4th hole up on the chassis is 11inches from the birdcage and the lower bar it is up hill will this work i read threw the post and seen were the front lower should mount centerline brain dead i need up


WPP
Member
posted November 17, 2003 05:15 PM
Can someone explain how the wishbone will work on the right rear right now i run a 4-bar left rear with the spring behind and z-link right rear with the spring on the birdcage i have been at the shop trying to figure out what the birdcage will do with this setup also i measured to centerline of the rearend and the mounting brackets on the chassis from the ground to the center of the rear it was 12 1/4 and the 4th hole up on the chassis is 11inches from the birdcage and the lower bar it is up hill will this work i read threw the post and seen were the front lower should mount centerline brain dead i need help