posted October 24, 2003 07:43 PM
I have a D & M 6 link / Z link and I would like to get more forward bite and tighten it up coming out. The rear springs are 200 LR and 175 RR. Could I drop the spring rate down 25 lbs. or is there anything anyone else has tried that will work ?? I'm also thinking about putting a J bar on it ???
posted October 24, 2003 07:52 PM
Do you have the z link on the lr ....if so do you have the mounts for the wishbone or a 4 bar lr?
posted October 24, 2003 07:59 PM
the Z is on both sides
posted October 24, 2003 08:16 PM
You are talking the reg 6 link from D&M with no adjustment for your bars. I won alot of races with my 6 link and last year got there new wishbone car. If it was me i would add a 4 bar to the lr and maybe shorten the panhard behind. I may put the 6 link on my right side for next year or if i can get my old 6 link back i would add the 4 bar to the lr and be flying
posted October 27, 2003 05:48 AM
Hey dirtracer can you PM me your phone number ?? I'd like to talk to you a little more about it.