Visit The Dirt Forum for More Information

Author Topic:   Z-Link swing arm help
Azrace
Member
posted September 30, 2003 06:55 PM
I know that when you run the c/o eliminators on the swingarm that you must increase the spring rate. I also see where most people recommend 300lbs or higher springs however I do not know the length of there swing arms. With a shorter swing arm you need a stiffer spring and with a longer swingarm you can get away with a softer spring. My question is what kind of final spring rate do you look for. If your RR was 175 and LR was 200 would this be ok or do they need to be stiffer than normal?