Visit The Dirt Forum for More Information

Author Topic:   4-bar z-link no sidebite
WPP
Member
posted August 16, 2003 12:14 AM
NO sidebite 250 lr 200 rr 650lf 700rf straight panhard bar 7 1/2 incches on frame down bottom hole on pinion . shocks are lr93 rr 93-5 lf 74 rf 75-3 do you guys think i should go to a 175 on the right rear the car is loose off How would a 225 lr 175 rr work would a 250 and 175 be too much split on the springs this is a dirt works


WPP
Member
posted August 16, 2003 12:25 AM
Also i forgot to mention on the shock it rolled 2 1/2 inches ON THE RR the carhas 50%cross 59.3 rear 68lr bite and 52% left


speedy79
Member
posted August 16, 2003 10:44 AM
I have run a 250 LR 150 RR, that hasn't been too much split, I would start by going with a 175 in the RR, You need more cross too, with mine I run 150 lbs of LR bite, I would start going up on that. You probably need to be in the neighborhood of 52-54% cross, thats where I have had the best luck, I run a BMS car. Oh yeah, I ditched the z-link on the RR and put a two link on it, that also brought some side bite into it.

[This message has been edited by speedy79 (edited August 16, 2003).]

Back to the Archives