Visit The Dirt Forum for More Information

Author Topic:   shorty bar help
monster2
Member
posted August 07, 2003 07:57 AM
Tried running a short pan hard bar, side bite was great! But the car really rolled over,way to much. Had to put 175 spring in right rear and took some angle out of bar,[bar is 16" and had about 6" of rake]. Went down to 4" of rake and car was much more driveable. I have a 650 in right front, had about 6" of shock travel. Do I put in heavier front spring or just keep flattening the pan hard. Car is awesome for sside and forward bite but because of excessive rollover I have to lift on throttle to catch the car so left side stays on ground.


#46
Member
posted August 07, 2003 08:33 AM
anyone out there running shorty bar?


bachshute
Member
posted August 07, 2003 08:18 PM
A 200# spring in rr may help with the roll over . Short bar works good on the slick .


Back to the Archives