Visit The Dirt Forum for More Information

Author Topic:   check this out...
A2KY2K88
Member
posted July 24, 2003 04:16 AM
With a 2 link, both springs on top of the rear,, what do I need to be running for springs?? Rear and front? Short track, usually slick. Im used to running with sliders and using the rotation of the rear, but this is a little different. I would think that the pullbar makes a big difference with this set up??


tilley88
Member
posted July 24, 2003 07:35 AM
If it's a Chevelle clip on dry slick, try this-650 lf, 700 rf, 200 lr, 175 rr, 93 shocks on rear, 75 lf, 76-2 rf, 600 spring on the pull bar, mounted on the driveshaft loop.


A2KY2K88
Member
posted July 25, 2003 04:00 AM
What if its metric??


tilley88
Member
posted July 25, 2003 12:01 PM
Then go with 750-800 springs in front, all else the same.


Back to the Archives