Visit The Dirt Forum for More Information

Author Topic:   C&S 6/8 jet conversion
jdj9410
Member
posted July 21, 2003 12:21 PM
Anyone tried this conversion. Suppose to keep 3 snd 5 from leaning on a small block. Wondering the results. Burned a hole in 5 this weekend on alcohol and thinking about trying it.


Sidebite252
Member
posted July 21, 2003 08:00 PM
What size jets you running? Where running 94 in front and 96 in back.


jdj9410
Member
posted July 21, 2003 08:50 PM
99 front and back. Sending carb back to C&S to have them check it out. Running belt drive pump with 3 at idle and 11 to 12 down straightaways.

[This message has been edited by jdj9410 (edited July 21, 2003).]

Sidebite252
Member
posted July 22, 2003 05:33 AM
Except for the jets size that's the same set up were running and the pressures are almost equal. The only time we burnt up 3 & 5 we had a dirty fuel filter.


jdj9410
Member
posted July 22, 2003 06:43 AM
Thanks for the info. I will change the filter. Bought the carb used so it probably won't hurt for C&S to have a look at it. Not going with conversion yet though.


Back to the Archives