Visit The Dirt Forum for More Information

Author Topic:   not rolling over
rookieracer36
Member
posted July 11, 2003 01:42 AM
this is my second year driving a imca mod the first year I had a car that rolled over tremendously but this is a new car and I cant seem to get it to roll over at all (only about about an inch if that) ??if you jack the front of your car, does your cars rear squat down or does it stay the same??
I am tring to find out if I would have a slider binding up or if the car is right because my new car does not squat at all!
what do you'll think or am I unclear ?


BigBlueFord
Member
posted July 11, 2003 07:23 AM
We need more details, i.e. spring rates by corner, shocks, pullbar type and angle, panhard bar type, location, and angle, etc.



uforacing51
Member
posted July 11, 2003 02:21 PM
rolling over sounds bad used in that context. LOL


rookieracer36
Member
posted July 12, 2003 03:10 AM
we are bottoming the rear shocks out and my dad is going to try something for tomarrow not sure yet he hasn't told me yet guess I will have to wait and see what ever it is hope it works but I do know that he is going to soften right rear spring up hope that helps. will let you know. later peps

[This message has been edited by rookieracer36 (edited July 12, 2003).]

trip143
Member
posted July 12, 2003 01:14 PM
If you are bottoming out the rear shocks a softer rear spring will only make your problems worse. I would say that you are rolling over excessively. A car that does not roll over much(maybe 2 1/2 inches on rr) will be easier and smoother to drive than one that uses up the entire shock travel. Tell us about your setup and what rear suspension you have. Include lower control arm angles and pullbar angles and rates.


Back to the Archives