Visit The Dirt Forum for More Information

Author Topic:   Car on scales ??
bachshute
Member
posted July 01, 2003 06:16 AM
Adding a spacer to the RR is about the same as taking turns out of the RR jack bolt.


DElliott19
Member
posted July 01, 2003 08:45 AM
backshute, adding cross or lr bite will tighten you up exiting the turn, but remember every adjustment also affects the entrance also. This will also loosen you up on the entry of your turn. You have to find that balance of lr bite or cross that feels comfortable to you. Not sure the 2 in spacer would be the best adjustment if you are wanting to tighten on entry or exit. What area were you trying to improve?


bachshute
Member
posted July 01, 2003 02:35 PM
I had a similar problem and found that I needed to add gear to the car. May not sound correct but it worked great now car drives in very well and the extra gear helps coming off.


HRT187
Member
posted July 02, 2003 05:16 AM
Moves the wheel further from the center of gravity. That's why you saw that change.


bachshute
Member
posted July 03, 2003 05:06 PM
Thanks for the replys ,


Back to the Archives