Visit The Dirt Forum for More Information

Author Topic:   4-bar z-link
diggen
Member
posted June 12, 2003 07:53 PM
What springs and weights have you tried? WE are on lf 750 rf 850 lr 200 on birdcage behind axle and rr is a 250 on swing arm...Thinking of running softer rf has anyone tried this...? plus lr sping is smashed all to $ell should we go to a 250 or even a 300 over there ...Car is good with some wins and always in top 10 just wondering what all has been tried and learned by racers running this set-up!!!! thanks


donslink
Member
posted June 12, 2003 09:39 PM
2003 Smileys


uforacing51
Member
posted June 19, 2003 12:13 PM
I have a Harris with that setup and so far have tried a 325 in the LR and 150 RR. don't do that, its hard on the car. Have also tried a 200lr 150rr split. it was better but I felt that there was still room for improvment. Trying a 250lr 150rr tommorow night, will keep you posted. Car came with a pair of 650's in the front but I changed to a 650lf 800rf I may even change that around too. again I will let you know.


Back to the Archives