Visit The Dirt Forum for More Information

Author Topic:   ride height
1bad1
Member
posted May 30, 2003 05:52 PM
how do you set ride height on a metric front end. does it hert if the front springs have pre load on them,tight when you jack up car thanks


HRT187
Member
posted May 31, 2003 03:05 AM
Sounds like you have a bushing binding or something...


1bad1
Member
posted May 31, 2003 09:27 AM
it's my friends car, I went and scaled it out for him and he set the ride heights. it has a 1000 lf 900rf 250lr 150rr I noticed when you jack the front of the car up off the ground the front springs are preloaded a lot by the jack bolts. is this ok its both sides is his ride height to high thanks



Back to the Archives