Visit The Dirt Forum for More Information

Author Topic:   sardeson z-link
dirtmod#2
Member
posted May 25, 2003 08:20 PM
have a sardeson z-link with torque arm
lf-800 rf-850 lr-225 rr-175 275 spring on torque arm no shock on arm just 90/10 over rear end, j-bar mounted bottem hole on rear end about 6inches up on left, shocks rf-75 lf 74 94's on rear. cars enters good but wants to com around if you get on the throttle hard, have to backpedtal the car thru the corner car comes off the croner pretty good.

any help guys thanks in advance!!

Alltel
Member
posted May 25, 2003 10:14 PM
thanks

hey also
r-57.5%
l-53%
c-51.5%


andykmod
Member
posted May 26, 2003 02:16 PM
Try a short pinion mount panhard bar.


roger rabbit
Member
posted May 26, 2003 07:30 PM
quote:
Originally posted by andykmod:
Try a short pinion mount panhard bar.

ant tmore cross. lower pinionside of j.1"
add rear stagger along with wedge.

[This message has been edited by roger rabbit (edited May 26, 2003).]

Back to the Archives