Visit The Dirt Forum for More Information

Author Topic:   4bar left swingarm zlink right
roger rabbit
Member
posted May 20, 2003 10:52 PM
cant keep Left front down. stif. rr flat j bar


roger rabbit
Member
posted May 20, 2003 10:57 PM
either wheelie or no sidebite . help . cant type


devil wrench
Member
posted May 21, 2003 08:59 AM
Try a little less wedge or lowering the bars on the left side.


WPP
Member
posted May 21, 2003 11:30 AM
What springs are you running and what type of car


andykmod
Member
posted May 21, 2003 03:49 PM
(just deal with it!!!!!!)it makes for cool pictures...... ha..ha What chassis brand you running?

[This message has been edited by andykmod (edited May 21, 2003).]

roger rabbit
Member
posted May 21, 2003 10:30 PM
quote:
Originally posted by WPP:
What springs are you running and what type of car

masterbuilt late model converted to mod. springs RF.850 LF850 RR225 LR175 j bar flat. short pullrod 18deg. with rubber no spring . 4 bar left side bars lowered helps. but itseems to not be the answer. thanks so much. rog.

MD
Member
posted May 24, 2003 11:16 PM
If you have a 225# RR on the swingarm you are very light. If you click on MENU top left of screen, look in tool box for swingarm wheel weight convertion. 175# LR seams light also. Don't be scared of a much stiffer spring on the swing arm.


dirtywrench13
Member
posted May 25, 2003 06:50 AM
i suggest 750 and 650 in front(watch your shock travel)and 225&275 in rear. we use an unequal length rayburn style z-link,and cant pull the l-f off the ground unless we put the horse in. (niebes roller engine,)


WPP
Member
posted May 25, 2003 10:41 PM
I have a swingarm right rear i have run a 200 to 350 my swingarm has two holes they are two inches apart if you run the spring in the back hole it stiffens the spring about 35 to 40 pds also the lenghth has a lot to do with it


Back to the Archives