Visit The Dirt Forum for More Information

Author Topic:   Correct Use of Caster/Camber Guage?
RC Racing
Member
posted May 19, 2003 12:34 PM
Almost too embarassed to ask, but ...

We have a bubble guage in the shop. I want to make sure I'm using it correctly. Does the below look correct or am I missing something?

1) Set ride heights (w/shocks removed)
2) String front & rear tires to make sure they're in-line/straight/parallel.
3) Remove dust cap & place bubble guage in its place.

Correct method guys?

thanks

------------------


autoshop
Member
posted May 19, 2003 02:57 PM
Check the gauge , Some say to turn wheel out 20 degrees and set to 0 some say turn in 20 degrees and set to 0.
either way turn wheels to 20 then turn to 20 degrees the other way and read your caster.Turn to straight ahead postion and read camber.


hiredgun
Member
posted May 19, 2003 02:59 PM
MAKE SURE YOUR IDLER ARM AND PITMAN ARE RUNNING PARALELL W CENTERLINE


Back to the Archives