Visit The Dirt Forum for More Information

Author Topic:   Brinn tranny ?
Racer X
Member
posted May 18, 2003 03:52 AM
If you are running a 163 tooth flexplate make sure you get a bellhousing that will work with that flexplate. Alot of the aftermarket aluminum bellhousings (quartermaster,tilton) will only work with 153 tooth flexplate.

[This message has been edited by Racer14K (edited May 20, 2003).]

Racer X
Member
posted May 25, 2003 10:11 PM
Got the tranny on saturday.Have a ? on shifting.When leave the track and your going back to the pits do you push in the clutch an put it back in low or just put in neutral and coast into your pits or something else. Thanks.

[This message has been edited by Racer X (edited May 25, 2003).]

HarrisMod#30
Member
posted May 25, 2003 11:11 PM
shift into neutral and coast as far as you can , then shift into low and then push the clutch in