Visit The Dirt Forum for More Information

Author Topic:   notchin the frame to clear 10 wheels
dtd_93
Member
posted March 24, 2004 04:50 PM
i was wonderin if anyone has or can get me any pic of how they notched there frame out in the front to clear 10 in wheels.. am think of goin to the 10 inches this year since we are allowed them this year

or would a 10 inche tread work on my 8" rims??

joetaylor
Member
posted March 24, 2004 05:19 PM
I have nopic avalible but it is easy where the tire rubs cut it out in a sweeping fasion then box it ack in smooth it out and paint itcan't be cought by the tech.

------------------
U LIFT U LOOSE


tech355
Member
posted March 24, 2004 09:12 PM
with a 2 inch offset and 1 inch spacer we dont have a problem except at the extreme locks and by then you probably need to be slowing down anyway. But we do use a dirt bozz 3056015 hoozier. my experience is the wider tires on 10 inchers roll over too much.
I'm a hoozier distributor and they recommend
this as the largest size for the 10" rims.

------------------
Light it up, Baby!


dtd_93
Member
posted March 25, 2004 04:00 PM
the car is an 80 malibu, and i am running or well i was running i donno what the ten inch versions of thease are yet haven;t gone to the tire shop yet.. but any who here are the sizes

left right
225/70r15 235/70r15

and they got to be dot approvied

bobaluuu
Member
posted March 25, 2004 08:40 PM
that tire is entirely too small for a 10 inch rim. aa 275-60-15 is correct for the rim and a 255-60-15 for the left side probably. the tires you mentioned are for 7 to 8 inch rims. or hoosier dot dirt bozz
305-60-15 and 285-60-15.

------------------
Light it up, Baby!


dtd_93
Member
posted March 27, 2004 08:49 PM
yeah those where what i was runnin last year haven't made it to the tire shop to find out what will give me the same roll out as them but with the width


Back to the Archives