posted March 15, 2004 03:34 PM
what does the degree need to be on top control arms on a 9" have heard 15 on r/side and 18 on l/side.
posted March 15, 2004 03:48 PM
Why mount the left upper at a different angle than the right?
posted March 15, 2004 09:56 PM
if your rear end is jigged right you shouldn't have to mess with it i always suggest taking it to a chassis builder to have it igged insted of tring to do it yourself
posted March 21, 2004 09:59 PM
quote:Originally posted by imperial: what does the degree need to be on top control arms on a 9" have heard 15 on r/side and 18 on l/side.
iam saying that up hill would be higher on the rear-end and down going to the car,checking degree on the top of control arm thanks imperial.
posted March 23, 2004 06:56 PM
uphill is uphill toward the front. meaning the front is higher than the back. so if the trailing arms are mounted downhill, then the rearend mount is higher than the frame mount. or vise versa.