posted March 09, 2004 03:42 PM
i use the 76 chevy 2wd pick up manual master cylinder for my hobby car, I was wondering which line goes the front brakes and which to the back. One has a big holding tank and the other is smaller. any help
posted March 09, 2004 03:51 PM
the big resivor goes to the front calipers small to the rear drums
------------------ U LIFT U LOOSE
posted March 09, 2004 09:10 PM
UM sorry but if both pistons are the same size then they will have the same pressure on each line. They put a bigger tank on one side because the calipers will take more fluid as the pads wear than the wheel cylinders will.