posted February 25, 2004 03:38 PM
does any one know a good way to mount a brake pedal and gas pedal in a 79 monte carlo
posted February 25, 2004 04:23 PM
there are 1000 different wayts to do it just depends on your setup are you running stock master or afterrmarket also is your seat way back or is to up so you can reach the stock stuff?
posted February 25, 2004 05:34 PM
well, on my brake pedal, i just cut some steel and made a spacer. welded it right to the stock pedal. like 5 inches. the gas pedal i used some 1 inch square tubing, welded the aftermarket pedal assembly to it, then i cut to fit the tube. welded it to the roll cage.