Visit The Dirt Forum for More Information

Author Topic:   vibration / rattle
Drogo99
Member
posted February 08, 2004 05:38 AM
try to dis connect the trans and see if the noise is in the engine or in the trans


racer17j
Member
posted February 08, 2004 09:13 AM
mine did that last year it was a t-350 tho c sounded kinda like a loose torgue converter then that nite gear on the output shaft flew apart on me and locked the tranny up has to take the dirve shaft out to even get it off the trailer


Okie11m
Member
posted February 08, 2004 01:53 PM
I had a pickup that did that.The tranny still worked but I started wondering for how long!! Changed the converter & fixed the problem. Once the converter was out you could shake it & it would rattle.


Drogo99
Member
posted February 08, 2004 04:21 PM
your running an adapter that bolts on back of crank i tkink they call a sunstar or something anyways check the splines in it and trans. probably has a little play in it causing a rattle when engine is shutting down and getting quiet and load is shifting on splines. while its running theres a load on splines.. reach up in if u can and try to move shaft cant remember if u havr the room to or not.


dan ferry
Member
posted February 08, 2004 07:08 PM
oops just noticed u run a dummy not a coupler but still thinking splines


Back to the Archives