Visit The Dirt Forum for More Information

Author Topic:   rear?
dan ferry
Member
posted January 26, 2004 06:08 PM
i talked to moser on ordering a rear but thinking on maybe doing it myself with a rear already jigged. moser asked about pinion offset what should i be tring to get in pino\ion offset? he was saying 1/2 inch will make it centered. im thinking on about a 62" wide also from axle to axle outside. any ideas?


o5racer
Member
posted January 26, 2004 07:49 PM
The centered pinion is over rated. The rearend under my metric is a 62 inch with the pinion offset to the right so that both axles are identical. Why have a left and right spare? theres no problem with the driveshaft hitting the side of the transmission tunnel.


dan ferry
Member
posted January 26, 2004 07:54 PM
is that 62" total or housing flange and what tire u run?



dan ferry
Member
posted January 26, 2004 07:59 PM
and this means the driver sidetube sticks out farther than the other maybe require diff offset?


dan ferry
Member
posted January 26, 2004 08:17 PM
racer05 what is your axle length im lookin at one not together that uses 29 3/4 axles


Back to the Archives