Visit The Dirt Forum for More Information

Author Topic:   need to know what kind of flywheel,clutch and PP to used to use
marksracing
Member
posted January 21, 2004 10:08 PM
we are runnig a sims modified this year .we have a 3 speed sag trans. what is the lightest stock oem flywheel,clutch and preasher plate set up that i can buy at a local part house. flywheel must be steel please help.

[This message has been edited by marksracing (edited January 21, 2004).]

racer17j
Member
posted January 22, 2004 05:53 AM
look into corvette stuff thats gonna be your best bet if you can run a nodular fly wheel not sure if they let you guys run them ot not


daddyrich
Member
posted January 22, 2004 06:21 AM
just read the rules again it doen't say anything about stock nodular so thats what i would go for they came in vettes and camaros


marksracing
Member
posted January 22, 2004 09:42 PM
what year model vett or camaro .what about the cluth and pressplate


racer17j
Member
posted January 23, 2004 04:58 AM
mid 70's i believe same on the clutch stuff we usually run the clutch off a 75 camaro


ctfarm
Member
posted January 23, 2004 01:41 PM
84-86 Vettes used a lightweight 10.5" flywheel 153 tooth.



marksracing
Member
posted January 24, 2004 11:14 AM
thanks guys


Back to the Archives