posted January 18, 2004 05:35 PM
i know that we have discussed the sway bar topic a ton of times but i need some help cause this year we can not run them on the front or back. My question is would you have to change springs or what would you have to change from runnning one to not running one i have always run a front sway bar 1 1/8 diameter. Thanks again fellas as always your the best
------------------ you never know how fast you are going when your in the lead, until you blow the announcers hat off!!!
posted January 18, 2004 07:03 PM
when i switched from swaybar to no swaybar i went up 100lbs on both front springs. it was a little soft otherwise.
posted January 19, 2004 07:49 AM
Ya, I've heard a 1" bar is about 100lbs of spring and a 1 1/8" bar is about 200lbs of spring. Right front would probably be the spring that needs the most attention.
I know when I switched from a 1 1/8" bar to a 1" bar the front got a little spongy with the same springs.
posted January 26, 2004 06:53 PM
WE DON'T RUN ASWAY BAR AT ALL ALL IWOULD DO ISGO UP ON YOUR SPRING RATE ON THE RF YOUWILL BEJUST FINE
------------------ TURN LEFT GO VERY FAST
Eric Dailey#1 Member
posted January 29, 2004 12:34 PM
before you change anything run it without the swaybar. your driving style may dictate thats the perfect setup for you. we have a practice day before the season starts. maybe your track will give you one to compensate for the change. all they can say is no.