Visit The Dirt Forum for More Information

Author Topic:   front end settings
way2fast72
Member
posted December 17, 2003 02:03 AM
lots of replys on metric car spring rates, so thought I would ask. Where do you guys set caster,camber and toe out on these things? like I said, metric car is new to me,dont wanna look like a balloon with a hole in it. thanks


way2fast72
Member
posted December 21, 2003 09:21 PM
just keepin it alive, come on guys share some of that hard learned info, thanks


racer17j
Member
posted December 21, 2003 09:55 PM
what's the track like high bank flat tight or sweeping turns?


way2fast72
Member
posted December 22, 2003 12:04 AM
moderately banked large 3/8 mile, sweeping turns.


JRB13
Member
posted December 22, 2003 07:26 PM
i agree thats pretty much exactly what i run i reccomend putting good bushings in front end if you can run adj sway bar i just bought new sway bar links and used a die and threaded the bolt the whole way down threw away sleeve and used the bushings with double nuts to hold them and the lock nit on the top one.


way2fast72
Member
posted December 23, 2003 09:34 PM
thanks guys