Visit The Dirt Forum for More Information

Author Topic:   It's been asked before
jasonsr
Member
posted November 20, 2003 09:29 AM
OK, I had a buddy wire my car last year with a and now he is not my buddy anymore, so needless to say, I am wiring it. I searched old posts and found a wiring diagram attached in jpg format however the link was bad. Can someone repost the pic or send me a diagraqm, website or something.

Thanks.

racerguy500
Member
posted November 20, 2003 10:48 AM
GM car? With or without ford solenoid? HEI? Alternator? Anything else we need to know let me know. I don't have one on computer but I could mail you one if no one else can help or I will see if I can do one and email it to you when I get the info I need. Good luck.


jasonsr
Member
posted November 20, 2003 11:21 AM
It is a GM, with a ford solenoid, HEI, no alt, running a mini starter, master cutoff, on switch and push button start. Thanks for any help I can get


loojack
Member
posted November 20, 2003 03:44 PM
Hi, Jason, Try a search on the forum, I've seen them on here before. Also try an internet search, seems that demo derby sites can be helpful. Hope this helps...loojack
PS The car looks great!!!

------------------
"loojackracing, a not for profit organization"


RACER19S
Member
posted November 20, 2003 04:02 PM
If you dont want to mess with the wiring yourself, QuickCar products makes a wiring kit with all the ends already in place, its simple and dosent cost too much either. Also has a diagram where everything needs to be.
Nick19


racer17j
Member
posted November 20, 2003 06:47 PM
i e mailed it to you


jasonsr
Member
posted November 21, 2003 11:26 AM
Thanks to everyone that sent me stuff, I have made this file if anyone needs it.

Jason Sr.

racer17j
Member
posted November 21, 2003 10:29 PM
you've got it backward the stater wires should be on the left side and the power wires should be on the right


waltonjr1
Member
posted November 22, 2003 01:25 PM
That does not make a difference,you can go either way.All the s terminal does is connect the two like a switch.

------------------
DEANJR#22


jasonsr
Member
posted November 22, 2003 07:49 PM
I was told that it did not make a difference, if I am wrong I will change it. Sorry, just trying to help out like I have been helped. I'm pretty descent with Autocad and and details that I can get race car wise, I draw them, and print them for anyone to use.