Visit The Dirt Forum for More Information

Author Topic:   LR Axle Play
RangeRover
Member
posted November 05, 2003 06:42 PM
I ran one of those and you need to strengthen the plate somehow,either by making your own using thicker material or doubling up on plates to hold it,also make sure you spot weld the bearing to the axle to keep it from pulling out,mine did this on the second race out.


RangeRover
Member
posted November 05, 2003 07:59 PM
That should fix the problem. I made 4 big "C" pieces to put on each side. I loved the bolt in rear but always had that problem till I did the trick. One thing to be sure and check is tube wear. If you ran it for more than a few races with the slack it probably wore the tube out of round.


Back to the Archives