Visit The Dirt Forum for More Information

Author Topic:   raising upper control arm mounts on rearend
OppendikeRacing29
Member
posted September 10, 2003 07:21 PM
Has anyone tried raising upper contol arm mounts on the rear end for more bite. Alot of cars around here do this. Wondering if its worth it


fastride
Member
posted September 10, 2003 08:03 PM
ARE YOU RUNNING A PANHARD BAR FASTRIDE?



Darcy
Member
posted September 12, 2003 05:16 PM
where are you raising the arms on the diff or the mounting points on the body


OppendikeRacing29
Member
posted September 12, 2003 07:22 PM
differential


fastride
Member
posted September 13, 2003 12:26 AM
thanks for that


armintroutracing
Member
posted September 15, 2003 03:18 AM
has anyone tried raising the uppers and lowering the bottems?


JOHN NIP
Member
posted September 15, 2003 08:04 AM
can someone explain how to do this?


boas51
Member
posted September 15, 2003 08:36 AM
if i was to make the mounting point on the frame lower for the upper mounts would that do anything.... I can do it on the rear end too obvious and well the track tech would not like it...but could maybe get away with lowering the mount on the frame a few inches


OppendikeRacing29
Member
posted September 18, 2003 07:06 PM
that would do the same thing, it puts the upper contol arms at an angle down and they act like a pull bar and lift the car and plant the tires


dtd_93
Member
posted September 18, 2003 08:13 PM
thats what I Was hopin to hear


Back to the Archives