Visit The Dirt Forum for More Information

Author Topic:   Darn
posted August 13, 2003 11:00 AM
Went to get the master cylinder for a 69 c/10 chevy to put on my new monte carlo for manual brakes alike yall said and I was happy untill I went to bolt it up, The way the chasis builder has done the roll cage the master cylinder was too long, All I have is 6 inches between fire wall and roll bar, chasis builder said they always run the aluminum howe cylinders but is there anything that is shorter than the onfrom c/10 and still have 2 stage, I have found some to fit but they are all sinle stage, so what should I do or is it off to the race shop for a expensive master cylinder

rico 08
posted August 13, 2003 04:14 PM
I'd modify the cage,i seen a guy install a short single stage master cyl only to have fits later.

posted August 14, 2003 07:14 AM
I ll check the fairmont but I will put a wilwoood or howe dual stage before I put a single stage

Back to the Archives