Visit The Dirt Forum for More Information

Author Topic:   camaro front spring height?
posted July 10, 2003 07:13 PM
i run 12 inch springs with 1/2 inch spacers.
for dirt

redneck racing
posted July 10, 2003 11:39 PM
Ive ran both ways, the 12 inch springs are pretty fool proof in my opinion. The 9.5 inch i ran with the adjustable spacers which are a pain cause you have to takem apart and reset them if your ride heigths are off so I solved the problem and now run wt jacks this makes it so much easier if your rules will allow. My 2 cents. Eddie

posted July 11, 2003 10:04 AM
i use the 9.5 springs with the spacers.
the reason being the 9.5s are cheaper
and with the adjustable spacers i can set my cross wieght where i want it

posted July 13, 2003 08:26 AM
Here is what we just did.
We run the short springs with adj spacer on right front and solid spacer on left front. I took the adj ring off the adjustable one and had a machine shop cut notches around the outside every 1/4" then put it back in the car. Then used a 3/8" drill and drilled a hole below the upper A-frame on the right side and now we can adjust it like you would a rear brake adjuster on drum brakes. We also used a dust hole cover off rear brakes to plug the hole just to keep the questions down.

Back to the Archives