Visit The Dirt Forum for More Information

Author Topic:   cam
allriggs
Member
posted July 08, 2003 06:12 PM
what would be the best cam set up for a 351w and still pull 16# of vac at 1000rpm or below. scott


I must be the only ford junkie here?????

[This message has been edited by allriggs (edited July 09, 2003).]

wizzard
Member
posted July 09, 2003 06:53 PM
lunati part #lun-00064lk pulls hard to 5grand still pulled 17lbs in my buddy's 4x4. it was 218 at .050 dur. with 488 lift.its a 302 cam in a 351w just had to use 302 firing order


Back to the Archives