Visit The Dirt Forum for More Information

Author Topic:   OILPAN
waltonjr1
Member
posted July 04, 2003 02:06 PM
CAN ANYONE TELL ME A GOOD CIRCLE TRACK PAN TO USE ON AN ENGINE IN STOCK LOCATION ON A 79 MALIBU.A GUY I KNOW HAD TO CUT THE CHASSIS UNDER THE MOTOR TO GET THE CLEARENCE HE NEEDED.HAS ANYONE HAD THIS PROBLEM.

------------------
DEANJR#22


Eljojo
Member
posted July 05, 2003 08:44 AM
I personally like the Kevco pans. Don't get the cheapie...spend a few x-tra $ and get the one with the gates, removable tray, and crank scraper.


rocket36
Member
posted July 05, 2003 10:01 PM
moroso and miloden both make nice pans, have heard that coleman are good too.
definitely try to get one with gates


dirtracer7
Member
posted July 05, 2003 11:16 PM
I got a custom made pan from kevko so I could set the motor back. It rum about $20.00 more to have made like I wanted than one off the shelf cost. works great got gates and a scraper.


waltonjr1
Member
posted July 06, 2003 01:06 AM
Thanks,im going to try the kevko 1087

------------------
DEANJR#22


DL406
Member
posted July 06, 2003 10:28 AM
I've had real good results with the Kevko 1087,plenty of clearance for everything and very good quality.


Back to the Archives