Visit The Dirt Forum for More Information

Author Topic:   Adjust ride heights
posted May 16, 2003 05:54 PM
How do YOU adjust your ride heights?

posted May 16, 2003 07:37 PM
cutting springs, adding shims, wieght jacks

posted May 17, 2003 10:21 AM
If BK's suggestions aren't allowed by the rules, try tire diameter. Not all tires that are the same size are the same diameter. a 225/70 15 may vary by an inch or so(in circumference), food for thought.. hope this helps..loojack Excuse the spelling..

"loojackracing, a not for profit organization"

posted May 17, 2003 05:00 PM
On the front of the car I use the short HyperCoil springs and then I welded in hidden adjustable coil spring shims which I bought from Midwest Motorsports. By doing this I can adjust the ride height to anything I want it to be. It is almost like using a weight jack. All you have to do to adjust them is drop the lower A-arm and spring and ***** the adjusting shim up or down. I did this to my car because I was bottoming out in the corners. In the rear I would say that coil spring length is the easiest way to adjust height. Good Luck!

Back to the Archives