Visit The Dirt Forum for More Information

Author Topic:   body mounts
longracing25
Member
posted April 25, 2003 03:53 AM
I removed the rubber body mounts on my 79 monte, can i just drop it, use the bolts and bolt it down?


doubletrouble
Member
posted April 25, 2003 08:44 AM
We removed all the body biscuits all the way around the car.We tooks bolts and washers and tighten them down to were the body touch the frame.Use a good impact and suck that baby down tight.When welding the cage there were a few spots we spot welded body to frame.This makes the car very ridgid.


racer17j
Member
posted April 25, 2003 12:20 PM
i just drop mine on the frame and weld a few spots here and tyhete but mostle i have my fuel cell and battery mounted so it hold ythe body in place too


SLEEPY GOMEZ
Member
posted April 26, 2003 01:01 AM
Take the rubber mounts out. With the body raised off the frame (2X4s across will do). Cut 1" X 3" holes with a torch in the area over the frame rails. Then drop it down and weld it every where you can. If you get 1 1/2" sq tubing pieces, 4" long, and weld to frame first the body can be shoved back another 7/8" for a touch more rear weight. SLEEPY


Back to the Archives