Visit The Dirt Forum for More Information

Author Topic:   Camaro Springs Way Off
NYhick
Member
posted April 24, 2003 08:20 AM
I changed the springs in my camaro from the stock springs to 12" springs from Day Motorsports and now my ride heights are 6" Pass. and 5.5 Driver...... I went with a 1000# 800# split. The car sits way low now and I was wondering if anyone else has put aftermarket springs in a camaro and if so what lengths were they. I had to jack the car up while rolling it off the lift because the bell housing was hitting and it is only like 3.5" off the ground. What have you guys used and did you run into the same problems???????


backwoodsracer
Member
posted April 24, 2003 03:11 PM
thanks backwoods racer, I'll see ya saturday by the way, does anyone have a use for a 11" 800# spring?? I have one, what good they are I dont know... $30 plus shipping, I just paid 50 and installed it for 20 minutes, not a minute of race time on it....


NYhick
Member
posted April 24, 2003 09:06 PM
Its a 5 1/2 inch diamater by the way...


66jj
Member
posted April 24, 2003 09:17 PM
thats what metrics use up front.

jj

backwoodsracer
Member
posted April 26, 2003 09:17 AM
Its 10 am and its pouring here I dont think were going to run unless you have a canoe.Give me a call and I will figure out how to get those spacers to you this week so your ready for next week.


Back to the Archives