Visit The Dirt Forum for More Information

Author Topic:   Tranny
Whitelightning
Member
posted April 14, 2003 02:18 PM
I found a nova with a 3 speed tranny, bell housing, and I am converting from a autotrans, what all do I need to convert this and can I get everything else at part stores. Also the shifter and pedal assembly is in the nova will It work in a 84 monte or have I done got myself in a big mess? Oh is tranny and bell houseing worth 200 dollars


redneck racing
Member
posted April 14, 2003 07:40 PM
If the 3-speed has the gear ratios you need ya id say it would work,as for the bellhousing I wouldnt want the stock one id get a scattersheild they run about $125.00 out here for a used one. You will need a pedal( can probably make one ) a swing arm and the connecting rods. the clutch fork part# cf100 for $15.99 can be bought at the local parts store. The swingarm or(z-arm) has to come from the dealership or wrecking yard the connectors you can probably make. Eddie


Pickel
Member
posted April 14, 2003 08:24 PM
I agree with redneck on getting a scattersheild but on the pedale here a cheap way to do it..you need a pedal(clutch or brack) about 5 inches of chain and two 3/8 bolts and a rear shock bolt..you drill the clutch fork for the 3/8 bolt then you attach the chain and then drill a whole in the floor put the shock bolt on the floor(you may to put a brace on the bolt)drill you pedal for the shock bolt and the chain then mount it and ajust chain .. its works great for me..


redneck racing
Member
posted April 14, 2003 11:29 PM
Pickel the chain goes through the floor to the clutch fork right. This eliminates the use of the z-arm am i correct? Eddie


Back to the Archives