Visit The Dirt Forum for More Information

Author Topic:   help w/ leaf spring bushings
justin
Member
posted March 30, 2003 09:49 PM
What's the easiest way to install the front bushings in the front spring eye? This is the first time I've had to do this. I was looking at the spring and the bushing today and the bushing is bigger in diameter than the spring eye and doesn't look like it'll fit at all. These are Landrum multi-leafs and Landrum bushings. Am I missing something here or what? Thanks in advance.

Justin

rico 08
Member
posted March 31, 2003 12:01 PM
I beleive you must use a shop press.


c21
Member
posted March 31, 2003 01:41 PM
often a shop press is required (and some clevor use of scrap material to support the spring)

the eye will open to accomadate as you press.

c21

Back to the Archives