Visit The Dirt Forum for More Information

Author Topic:   muncie 3 speed
AC156
Member
posted March 18, 2003 01:39 PM
Yep, much heavier and gorilla tough. I've got one that has been ran for years in dirt cars, it has a 1.79 second gear. Some of them do not have a rear mount though, mine don't.


flanndad#17
Member
posted March 18, 2003 10:11 PM
hey racedoctor, what did you do to to mount the tranny without a rear mount.
I've picked up a 1.75 and not sure if I saw a rear mount on it.


AC156
Member
posted March 19, 2003 07:03 AM
I'm not sure which one it is but here's the info on ratio's.

TRANSMISSION RATIOS:

SAGINAW 3-SPEEDS (CAST IRON)
0 LINE INPUT -2.85/1.68/1.00
1 LINE INPUT - 2.54/1.50/1.00
2 LINE INPUT - 3.11/1.84/1.00
3 LINE INPUT - 3.50/1.89/1.00

SAGINAW 4-SPEEDS (CAST IRON)
0 LINE INPUT -2.84/2.01/1.35/1.00
1 LINE INPUT - 2.54/1.80/1.44/1.00
2 LINE INPUT - 3.11/2.20/1.47/1.00
3 LINE INPUT - 3.50/2.47/1.65/1.00

MUNCIE 3-SPEEDS (CAST IRON)
0 LINE INPUT -3.00/1.75/1.00
1 LINE INPUT - 2.41/1.57/1.00

MUNCIE 4-SPEEDS (ALUMINUM)
0 LINE INPUT -2.56/1.91/1.48/1.00
1 LINE INPUT - 2.20/1.64/1.28/1.00
2 LINE INPUT - 2.52/1.88/1.46/1.00


jnewman44
Member
posted March 19, 2003 08:36 PM
Whats a 0 Line Input and a 1 Line input and so on?


6pack
Member
posted March 19, 2003 08:55 PM
Those grooves or rings go across the spline's, around the diameter of the input shaft.


avila
Member
posted March 20, 2003 01:28 PM
type = m)uncie, s)aginaw

type years side cover id case id case length application
bolts
---------------------------------------------------------------------------
m318/319 '55-68 4 cast iron 7-1/8" --

m330 '69-78 7 cast iron 11" fully sync'ed

s326 '66-+ 7 cast iron 9-5/8" fully sync'ed


RaceDoctor
Member
posted March 20, 2003 10:11 PM
FlanDad,sorry it took so long to get back to you, I don't get on here every day. To the question,the cars that I have ran this tranny in all had mid-plate , so I could get by with no rear mount...I thought that the one I had was a 1.75 but a local tranny expert told me it was a 1.79 second...He knows more about trans than I do...LOL


Back to the Archives